Adding a second receiver to 3GR...

[Adam F]

Have bought a second Futaba R603ff receiver to use with my 3GR, but cant get it to sync up...

Just get the flashing green, press the button but wont sync...

Its from the US, but have been told its exactly the same....

Any idea's?

[chris_dono]

try changing from ppm to hrs/pcm etc on the radio, some receivers/servos need different ones and won't work

which servo are you running ?

[Big G]

I think flashing green means it can see a signal, but it's not paired...

a quick button press on each should pair the 2. Not sure abou tthe 3GR, but on my 3VCS it's on the back on the module

[Adam F]

I have a Savox 1258, although this is the same in both cars and I currently use PPM..

Have tried pressing the button, but nothing happens...

[blue_pinky]

If it's just sync'ing your struggling with it shouldn't be anything to do with any other electrics or the mode's I'd have thought...but then weird things do happen sometimes!

For me pressing the sync buttons on both the rx and tx at the same time did the job without any issues, I have the 3pk with a fasst module. The module and 1 receiver are from china, the other receiver from the US. I run in HRS mode and run savox servos as well for reference, but sync'ing the rx and tx on that kit should, in theory at least, be straight forward.

Not a lot of help I know, so, I guess you've tried pressing the 2 sync buttons in different orders? What about with only the esc connected for it's power? Were there any other people running fasst systems anywhere nearby when you were trying to sync them? Or anything else that runs on 2.4 ghz anywhere nearby for that matter? Not really sure what else to suggest?!?!

[Adam F]

Didnt know there was a sync button on the tx...

Any idea where it is?