|
|
#1
|
|||
|
|||
![]()
Has any body ever run a tekin rs speedo with a nosram storm evo motor ???
Just wondering what they think to the set up |
#2
|
||||
|
||||
![]()
ive just had a new rs pro mate...took it out the box,fitted it and it worked for around 10 mins and died...hardware issue apparently!! id go gm if i was you...the new gm120 2010 looks better from what ive seen testing this weekend,and more reliable
|
#3
|
|||
|
|||
![]()
mine is going well so far its just the motor i cant seem to get much brakes
|
#4
|
||||
|
||||
![]()
I've run the old nosram motors before Tekin had theirs available and I ran similar setup from what I can remember.
This is what I run in offroad and change very little between 2wd or 4wd Dual mode timing 80% db10% bs 100% tp 4 lm 90% maybe more if you are using hi c rated lipos) nw 8% hope that helps |
#5
|
||||
|
||||
![]() Quote:
You should have plenty of brakes, I have to turn mine down on the transmitter! |
#6
|
|||
|
|||
![]()
the motor is sintered and im running 100 % on the tekin and 100% on my tx but still the brakes are not no way near what they should be
|
#7
|
||||
|
||||
![]()
I've got a RS hooked up to a Novak Mongoose in my 1/18th scale and I can't ever get the brakes as sharp as I want them... it's a real shame, at Caldicot I found myself braking 2/3rds of the way down the straight just to slow down enough for the corner.
|
#8
|
||||
|
||||
![]() Quote:
Hope you get it sorted soon though, |
![]() |
Thread Tools | |
Display Modes | |
|
|