DIFF RING

[Chris Griffiths]

Hi guys, Im after some diff rings and in my instructions there part number - XT008 when you put this in the site it comes up thrust plate and the pic looks like its for the thrust bearig also. Is this right? Im after the 2 big washers that the diff balls sit on.


Chris

[Rebelrc]

have they got a flat on the inside to key them into the out drive? because the diff rings definately have.

[Chris Griffiths]

From what i can see in the pic no, they look really small aswell.

Chris

[Tom3012]

Im pretty sure i use losi xxx diff rings in mine, i had some spare xxx ones and when i cracked an original the losi ones are a good fit

part number... LOSA3070

[Chris Griffiths]

Originally Posted by Tom3012

Im pretty sure i use losi xxx diff rings in mine, i had some spare xxx ones and when i cracked an original the losi ones are a good fit

part number... LOSA3070

CHEERS TOM!!!!


Chris

[Bungleaio]

Becareful not to over torque the diff screw, the rings can snap if you do and you could ruin the diff half as this is threaded, there's no nut in the diff.