|
|
#1
|
||||
|
||||
![]()
Trying to get hold of a second receiever to use with my 2.4ghz Futaba 3GR.
Anyone know if I can get one of the Spektrum receivers to work? (Cheaper than the futaba.) Cheers |
#2
|
||||
|
||||
![]()
Hi there ,iv'e asked the same question,everyone says only futaba will work(603ff,604fs).expensive aren't they.The cheapest iv'e found on e-bay is in dinball over in the east about £50-£60 and postage.Haven't tried specktrum yet.
|
#3
|
||||
|
||||
![]()
I am having the same problem and in fact looking to get rid of my 3gr and get one of those new core rc ones the controller and reciver is £90 and a second reciver is £30.
A much cheaper option
__________________
|
#4
|
|||
|
|||
![]()
Futaba and Spektrum use two different methods. The Futaba jumps between frequency slots every few milliseconds, Spektrum uses two slots. Unless something has changed that I have not heard about, they are not compatible
![]() |
#5
|
||||
|
||||
![]()
Definately not compatible, as Stuey has said they actually use completely different types of 2.4ghz systems, as do all the manufacturers, so no mix and match like on 27/40mhz etc.
So far, as far as I know, the Tx and Rx need to be matching products to work when using 2.4Ghz...unless they all decide to share a standard sometime in the future?!?!
__________________
AKA: Andy Nancollis 1/10th drives: Yokomo BMax2MR & BMax4 1/16th drive: Carisma GTB Racing in South West: http://www.mendiprcraceway.co.uk/ Racing in Wales: www.caldicotrcracers.co.uk Kept running by: Yokomo via MB Models & www.tracksidespares.co.uk Shells by Square Crabs |
![]() |
Thread Tools | |
Display Modes | |
|
|