Servos for the 1:18 scale

[bedsrcmcc]

Just wanted to know what people are using in their 1:18th scale cars as I need to get one and not quite sure which to go for, decisions decisions...

[ashleyb4]

What car is it some cars you can fit larger servo's in. Some cars only take the smallest of small servo's.

A

[Ross]

I use a mini Savox in my shark,you can fit a full size servo in them, i'm not sure about the x-ray though.

[frogger]

If it's a Blaze or Shark variant then the Ino-Lab 261HB is the best you can buy, if you need a smaller or cheaper servo then the Savox 0257 is the one some people use.

You also want the micro XRay servo saver to go with it.

[bedsrcmcc]

Thanks, I have the Xray Servo Saver, just need to get the servo itself. I'll have a look at those suggested, thanks.

[bedsrcmcc]

Originally Posted by bedsrcmcc

Thanks, I have the Xray Servo Saver, just need to get the servo itself. I'll have a look at those suggested, thanks.

Installed the Savox servo tonight to ready to run. however, the servo saver collars that come with the Xray kit do not have a small enough splined hole to fit onto the tiny splined shaft of the servo. I've had to run with a servo horn, so lets hope that the metal gears hold out as the previous servo with plastic ones failed in the first heat!!!

Does anyone know anyone who does servo savers specifically for the Savox servo SH-0257?