|
|
#1
|
||||
|
||||
![]()
can anyone please advise me on were i can buy an undertray from for bj4we,can they be got in th uk? thankyou
|
#2
|
||||
|
||||
![]()
Nearly 100% sure a b44 one is a straight fit. After all basicaly the same car. Should be easy enough got from any model shop.
![]()
__________________
Feedback: http://www.oople.com/forums/showthread.php?t=32506 http://www.dropinnracing.com |
#3
|
||||
|
||||
![]()
the undertray is for a mate and he has tried the b44 one but he says they are different on the rear of the b44 the rear bumper sits in a cut out in the rear bulkhead,but its flush on his he says,(ive not had a look myself he as just asked me to pop a post up)if you know what to do to make it fit????
|
#4
|
|||
|
|||
![]()
Hi,
i made my undertray for my BJ4 from a clear .4mm plastic sheet from a hobby Shop. Just lay the chassis on it, mark the edges and cut with a plus around and bend on the chassis edges. Works fine and costs a bargain.... |
#5
|
||||
|
||||
![]()
I bought the Proline Vortex B44 kit for mine - for £15 you get a shell, wing and undertray. Haven't actually fitted the undertray yet, so don't know if it'll need modding.
__________________
Photos: Oople Invernational 2010 - Sodden Sunday Muchmore N. Irish GP 2010 (Touring cars) BADMCC 1/8th Nitro buggies Current cars: X6^2 | JC BJ4WE | TM E4 & E4JS | HPI E-Firestorm | Losi Crawler | + many F1s, super crawlers, scalers, drifters in the works... |
#6
|
||||
|
||||
![]()
Have got NEW, unsprayed (still with protective film on), genuine, JConcepts BJ4 WE Bodyshell, Wing and Undertray available FOR SALE. Can supply with either standard 6" wing and/or High Downforce 6.5" wing/s.
Sorry, will NOT break, will ONLY sell as complete set. Bodyshell, Undertray & single wing, £25 posted. |
#7
|
||||
|
||||
![]() Quote:
Agreed. Make one from flat sheet Lexan. .030" sheet traced out from a blank chassis, added .5" to the sides and folded up using an old wood clamp. Works perfect and costs almost nothing if you have the Lexan around. The next one I make will bend up under the front bumper... ![]() ![]() |
#8
|
||||
|
||||
![]()
The B44 works fine just make sure you screw it down in the back with the 2 screws in the centre rear.
|
![]() |
Thread Tools | |
Display Modes | |
|
|