|
|
#1
|
|||
|
|||
![]()
Iīve tried it several times the past weeks, but couldntīreach anyone, neither via the phone number stated on their website (answering machine all the time) nor through the contact formular or a regular e-mail. Any idea how to get hold of Keith or someone there?
|
#2
|
|||
|
|||
![]() Quote:
|
#3
|
|||
|
|||
![]()
Ah, you are there then Keith, I have sent a couple of emails and tried to phone you several times too and all to no avail also over the last 10 days or so....
Hopefully get hold of you this week somtime then. Darren
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ Tel : (01923) 816636
|
#4
|
||||
|
||||
![]()
I have also sent an email yet no reply
|
#5
|
|||
|
|||
![]()
Can you send again to [email protected] or message us on here with who the email was from?
Many thanks. |
#6
|
||||
|
||||
![]()
The power cable on my Muchmore power supply failed after about 10 meetings, looks like the live and nutral have both gone. Is this covered under the warrenty?
__________________
Mark Dyson Clown |
#7
|
|||
|
|||
![]()
Okay, thanks, so Iīll try again tomorrow morning to hopefully reach you.
|
#8
|
||||
|
||||
![]()
How have you tested the issue? I found that after a year i was getting intermitant power through the cable, opened to check the fuse and found the grub screw securing L & N had backed out causing poor contact if you twisted the cable the wrong way. Have you checked that? (only recomended if you know what you're doing!)
|
#9
|
||||
|
||||
![]()
I tested it with the meter, both live and neutral are dead but the earth is fine, its a mouled plug so theres no way in.
__________________
Mark Dyson Clown |
#10
|
|||
|
|||
![]() Quote:
|
![]() |
Thread Tools | |
Display Modes | |
|
|