Grip Roll

[Yoldume]

took the Durga out for its first propper run and it was grip rolling when i turned ze corners which was mildly anoyying

Whats the remedy ?

[ashleyb4]

What tyres are you running on what surface???

What setup are you running...

A

[Yoldume]

Erm tyres are the stock durga pins

and setup is stock running 30wt oil all round

[Big G]

I rolled over the 1st corner I came to running the SC10 on carpet trying to corner fast at high speed. 2nd lap I just took the corner more smoothly and not quite so fast and it went fine.

are you racing on carpet?

[ashleyb4]

Try cutting the outer row of pins off. Or try a lightly firmer spring possibly an anti roll bar. Bext bet would be ask in the tamiya section or ask the local"good driver" what he thinks..


A

[Yoldume]

ha this isnt at a track its where i run my cars

I take them upto the local golf course (not on the course) they have a large pond and probs 10 acre grassed area with humps and jumps that in the summer turn into picnic areas

anyway i was running on wet short golf course type grass and if i turned at speed and not heavily lightly the outer front would dig in and the car would flip cleanly onto its wheels and probs cartwheel from then on

i think the car is a bit soft on the damping side of things but had plenty of grip and handled the bumps really well