Wheels for Lazer ZX-5

[saxosim]

Hiya,

Please can anyone tell me what size/type wheels i should be looking for to get a spare set for my Lazer? I am still used to 1/8 scale and the 1/10 stuff is new to me. Noticed there are different width rims and all sorts of size tyre variations. I just want some spare yellow dished rims with Shumacher mini pins so any advice on which i need will be great please?

Cheers
Simon

[Col]

You'll be needing Kyosho wheels then...

Rears are the same for all ZX5's
SP and FS fronts are the same, but different from std ZX5 and RTR.

DMS amongst others have a good stock..


p.s. yellow wheels are gay

[littlened]

Hopefully someone else can confirm but..

If you have the SP or FS then you need;

Front wheels : Model number KW5201W
http://www.microtechracing.com//prod...cat=LAZER+ZX-5

Rear wheels - Model number W5204W
http://www.modelsport.co.uk/?CallFun...n&ItemID=34017

(I couldn't find the rears on the microtech site

If you have the standard lazer then its;

Front wheels: Model number W5026W
http://www.modelsport.co.uk/?CallFun...n&ItemID=18972

Rear wheels - Model number W5204W
http://www.modelsport.co.uk/?CallFun...n&ItemID=34017

[saxosim]

Cheers Guys,

Didn't realise they were almost manufacturer and model specific, will work out what I need

Cheers
Simon

[Col]

unfortunately they are. Swaps can be done with mods to the drivetrain to adjust offset and change hex size, but unless you've got loads of losi wheels then I can't see it bin worth it

[jim76]

i have a load of old original ZX5 wheels knocking about, some may still have part worn tyres on. I can post some up to you for peanuts as they are just taking up space. The rears will be ok for you which ever zx5 you have, but the fronts are only for the original or RTR version