Cr rear on xx4

[rob84]

When running a cr rear end do you need to cut the brace off on the pivot blocks? cheers

[Danny McGee]

Originally Posted by rob84

When running a cr rear end do you need to cut the brace off on the pivot blocks? cheers

eh!!!

brace on the pivot block? you mean the bits that join it all up? if thats what you mean then yes you do, we also flip them the other way and dremmel to improve the car over bumps

Danny

[Ferret]

If you have 2 degree pivot blocks then you can leave them, they are the same as the cut CR ones.

Avner.

[rob84]

I've put the xxxcr rear end on now, do i need to run a shorter turnbuckle as it has thrown them out or should i just move the ball stud in? cheers

[Ferret]

It is a setup thing; shorter turnbuckle will generally give you more camber gain than longer ones.

Avner.

[stuey]

Can I confirm with someone that these are the required parts to do the conversion?
A2129 XXXCR rear hubs
A2132 XXXCR rear wishbones
A2113 2deg piviot support
Do you swap the wishbones over, ie right to left, left to right?
I have searched but its taking me forever!
Thanks

[jono83]

CR rear wishbones are non handed so it wont mattet which side you use em on

[Southwell]

Originally Posted by stuey

Can I confirm with someone that these are the required parts to do the conversion?
A2129 XXXCR rear hubs
A2132 XXXCR rear wishbones
A2113 2deg piviot support
Do you swap the wishbones over, ie right to left, left to right?
I have searched but its taking me forever!
Thanks

You swap the pivot blocks over.