|
|
#1
|
||||
|
||||
![]()
Hi There
Just wandering if anyone could help me with a setup for kidderminser or coventry? Its the 1st time ive used the x6 on astro and i found it undriveable. The back end just kept kicking up and couldnt find any grip at all. Tried so many different tyres etc. Can anyone help?
__________________
Ledbury Model Car Club Rep Supported by Toy Box Racing - BLRacing - Answer RC - Maselton Model Centre www.ledburymodelcarclub.moonfruit.com |
#2
|
||||
|
||||
![]()
Have a look to this thread, tons of information and setups. Ellis'setup is probably the best to begin with.
|
#3
|
||||
|
||||
![]()
The Ellis UK setup sheet should have been included in the kit, if you follow this exactly you should be pretty much bang on, all the team guys use this setup pretty much everywhere.
One thing to pay special attention to is the weights, a big part of the X-6 squared setup is getting the weight up and getting weights in the correct area of the car to give a good balanced setup. If you bought the car new then you should have all this info in your kit, otherwise you will find it on the 'Tech' page of the X-factory site or on Petitrc.com as Arno suggests ![]() |
#4
|
||||
|
||||
![]()
Lol maybe we can compare notes, i was at Kiddy on sunday and had maaaahooosive understeer
![]() Ben |
#5
|
||||
|
||||
![]()
Bem i spoke to you at the weekend.
I was pitting in with Rich Plus i run the old x6 with nimh batteries not lipo
__________________
Ledbury Model Car Club Rep Supported by Toy Box Racing - BLRacing - Answer RC - Maselton Model Centre www.ledburymodelcarclub.moonfruit.com |
#6
|
||||
|
||||
![]()
The Boyz will correct me if I'm wrong. First, don't ever run 6 cells across the back, you've got to run 4 + 2. Then, get the weight the same as the LiPo set-up and you should be good to go.
|
#7
|
||||
|
||||
![]() Quote:
![]() I know who you are now ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|