Which cells to buy!!

[Kopite]

Ok guys,

I'm about to buy some new cells for the summer season (which has already started ), and was looking for people's opinions....

Initially, i was about to get some IB4200's, but i'm constantly hearing grumblings about cells dying etc..

I can't be doing with spending a fortune on these cells if that's going to happen, so what other options are available? i've heard that GP4600's are on their way, but does anyone know how long that's gonna be?

Any input would be great.....

Stan

[losixxx]

stick to ib4200's awesome power, you just need to look after them a bit more than 3800's and NEVER leave them for any period discharged. 4600's are coming out but don't know if there legal or not until april 2008

[_sleigh_]

Yeah the GP4600's are on the list for 1st April 2007 (approved 31/12/06)

Not sure if they come in any different heatshrink styles (don't think they do anymore) but just double check before you buy.

[GRIFF55]

I use strormforce 4200 cells, find them very good and are very well priced. hope this helps

[Kopite]

I've borrowed a pack of IB4200's, and they are boss, but i'm just put off by people, whom i know will be looking after their cells well, still having individual cells within a pack die on them.

Are the GP4300's and GP3700's being jibbed off now, cos the GP4600's are coming in? Or will they still be available?

[Hog]

Originally Posted by Kopite

Ok guys,

I'm about to buy some new cells for the summer season (which has already started ), and was looking for people's opinions....

Initially, i was about to get some IB4200's, but i'm constantly hearing grumblings about cells dying etc..

I can't be doing with spending a fortune on these cells if that's going to happen, so what other options are available? i've heard that GP4600's are on their way, but does anyone know how long that's gonna be?

Any input would be great.....

Stan

I am in exactly the same boat as you Stan. New on the list this season was a KMC conversion, brushless system and new cells. So far I've just about managed the KMC conversion..............so I'll be somewhere near the back come the regionals.

I'm running slightly old but well looked after 3700's (Thanks Niggs). Was convinced 4200's were the way to go but then I had a bit of a falling out on here with Dr. Voodoo after doing some investigation of my own from various forums. I'm just concerned about paying good money for 4200's only to have them die on me after only a (relatively compared to GP cells) few cycles.

A couple of guys at FORCC have been trying BATT 4000 cells which for unmatched packs seem okay. Longevity is something that only time can show.

[paulc]

i am in that boat too

[Kopite]

Ok, another question about the IB4200's...

When it's mentioned that you need to look after them more than the Gp's (for example), does this include only being able to run them once a day? Or once a week even?

[Nick Goodall]

I've got 4 packs of SMC 3800's, hardly used and one cell has died on me also so i'm not sure if there's a pattern developing but nothing odd happened, just went to run and the car had noooo punch - then we realised one cell was completely cold and won't charge.

[Wraggy]

Originally Posted by Kopite

Ok, another question about the IB4200's...

When it's mentioned that you need to look after them more than the Gp's (for example), does this include only being able to run them once a day? Or once a week even?

i run mine twice a day sometimes but i think as long as you leave them to cool down to normal temp b4 recharging then your fine?
i normally use the set ive run in the 1st round if i have to use a pack again , then you know they have had time to go cold again .
someone please correct me if im wrong ???

[PaulRotheram]

East power baby

[andy05]

Stan i think tony has placed a order of 5 packs of smc ib 42000s for you with our order of bits. If you dont want them let him know quick they are getting shiped in the next day or two.