pinion sugestions

[JCJC]

Pinion to suit kit spur with 5.5 Novak Brushless, any advise please, save me searching tinternet'

Kit spur.........keep it or change it ??

Thanks Guys

[bert digler]

Originally Posted by JCJC

Pinion to suit kit spur with 5.5 Novak Brushless, any advise please, save me searching tinternet'

Kit spur.........keep it or change it ??

Thanks Guys

use a 17 mate i use a 15 0on a 4,5

[pro4nut]

I reckon maybe a 30 or a 31................

[jim76]

Originally Posted by pro4nut

I reckon maybe a 30 or a 31................

LOL! Jordan would certainly be quick with that (when he finally reaches top speed)!

Do you know if it's a sintered rotor?
i ran a 17 on my 4.5 on Sunday and it was fine temp wise, and it was a pretty hot day. Wayne ran a 15 on his 4.5 and thermalled

i would say 16-17 depending on how twisty the track is.

[pro4nut]

Originally Posted by jim76

LOL! Jordan would certainly be quick with that (when he finally reaches top speed)!

Do you know if it's a sintered rotor?
i ran a 17 on my 4.5 on Sunday and it was fine temp wise, and it was a pretty hot day. Wayne ran a 15 on his 4.5 and thermalled

i would say 16-17 depending on how twisty the track is.

And that was sintered.

However 2 likely suspects,

1. Slipper clutch, too loose and i think the pads are worn. This is letting the motor rev up too much. Illustrated by Martin killing it in a lap, (lead thumb Johnson)

2. Actually 15 was pushing my luck heavily and a 17T would make more sense, this is what i ran all day at cml last time out, without a problem.


Second thoughts i reckon a 35T, that'll take him to the moon!!!

[jim76]

your just scared he will beat you Wayne!