TRF Serrated Wheel Nuts

[DaveG28]

Have bought a pack of the TRF serrated wheel nuts to stop the wheel falling off issue you get on the 501/511 as standard, but now they are here I can see they are not locking nuts, just standard. Am I missing something?? Tamiya advertise them as wheel nuts but surely they will fall off if they are not locking nuts?

[bigred5765]

there serrated on the edge that fit on the wheel, that locks to the rims there should be no nylock on them thats right,

[DaveG28]

Originally Posted by bigred5765

there serrated on the edge that fit on the wheel, that locks to the rims there should be no nylock on them thats right,

Wow, cool, I always assumed they would have both the nylock and serrated edge, think(?) I had some Schumachers that had both, but I'll give these a whirl then!!

[DCM]

no, just the serration.

What I do, is pop the wheel on, then add a drop of threadlock to the axle, then fit the nut, since doing that, never been an issue.

[mole2k]

I do the same as DCM, I used to suffer a bit with the wheel loosening but a dab of threadlock and i've never had the issue again.

[Rich D]

Originally Posted by DaveG28

Have bought a pack of the TRF serrated wheel nuts to stop the wheel falling off issue you get on the 501/511 as standard, but now they are here I can see they are not locking nuts, just standard. Am I missing something?? Tamiya advertise them as wheel nuts but surely they will fall off if they are not locking nuts?

Dave whats the part number and where from ? been looking for these for a while. We use them on our 416 WE`s at the club - they have never come loose.

[DCM]

you can also get plain (not anodised) serrated nuts, on eBay, about 20 nuts for the price of 4.

[MRD]

Ive been using the serrated nuts on all my metric cars. I use the Core RC ones, no threadlock needed, just tighten those bad boys and race.

[jimmy]

http://www.oople.com/rc/photos/cars/501x/hbwheelnuts/

I imagine the Tamiya ones are somewhat like the Hot Bodies ones above?

Anyone who tells you they will never come off isn't telling the whole story - but as long as the wheels are in good condition and mounted properly (and are GOOD wheels to begin with) then the serrated nuts are ace.

Strangely its only Tamiya that would have a problem with serrated nuts if you're using the old 501X wheels with the loose front hex. It could spin off one of these serrated nuts quicker than you could blink. New style front wheels are fine tho.

[Rich D]

Originally Posted by jimmy

http://www.oople.com/rc/photos/cars/501x/hbwheelnuts/

I imagine the Tamiya ones are somewhat like the Hot Bodies ones above?

Anyone who tells you they will never come off isn't telling the whole story - but as long as the wheels are in good condition and mounted properly (and are GOOD wheels to begin with) then the serrated nuts are ace.

Strangely its only Tamiya that would have a problem with serrated nuts if you're using the old 501X wheels with the loose front hex. It could spin off one of these serrated nuts quicker than you could blink. New style front wheels are fine tho.

Yep they look identical to those Jim - Ive certainly never had any come loose on my TC

[DaveG28]

Nearly all my wheels are the Tamiya yellow ones, not sure if that's old style or new!

Will try them and see, these are the trf nuts rather than third party ones, exactly the same but way more expensive!! Like the Tamiya bling turnbuckles!!

Talking of which, anyone know if they do the blingy blue turnbuckles any longer than 45mm?

[bigred5765]

we have always used the core RC ones,and have to say there is no need for thread lock if they have a seated edge as the core RC ones do,clicky
and come in pretty colours

[Rich D]

Ah cheers Carl they are the fellas