|
|
#1
|
||||
|
||||
![]()
Hi All
I am just installing my xcelorin esc in a B4 and it won't fit with the fan installed. I could lay the fan it on its side in front of the esc, but i wondered if needed it at all?. I am running the losi 6.5 motor with it and coupled with 2wd i wondered if the fan was not required. Can anyone advise? Cheers Dave |
#2
|
||||
|
||||
![]()
Well mine has run a 7.5 quite happily as have several others that I know of, but can't help with regards to a 6.5, sorry.
|
#3
|
|||
|
|||
![]()
Couple of lads at my club run them with the fan mounted in front of the speedo, doesnt get hot at all... should be fine without the fan depending on your gearing
![]()
__________________
Team Losi Racing, Horizon Hobby TLR 22 5.0, TLR 22X-4, TLR 22-4, 22-4 2.0 Atomic Carbon S2, S44, Vega B4.1 Trader feedback: http://www.oople.com/forums/showthread.php?t=19374 |
#4
|
||||
|
||||
![]()
I ran one in my xxxcr/xxxcr2 at the nationals without a fan no problem, that was with a 6.5 and a 7.5.
|
#5
|
||||
|
||||
![]()
Thanks all, i shall give it a go without the fan.
|
#6
|
||||
|
||||
![]()
I've run one with no fan and a 6.5 for most of the season. No problems at all (touch wood).
|
![]() |
Thread Tools | |
Display Modes | |
|
|