Madrat Setups

[Battle_axe]

The madrat/xpro buggy is getting more popular please post your setups here.

[Battle_axe]

ok i will start
proline dirt arena
35wt fron 30rear
inside hole front outside on the wishbone
middle hole rear outside on the wishbone
with a 17T brushed and 3700mah cells and proline holshots ribs on the front

[stampede vxlboy]

what set up would i need for my madrat i am using brushless mamba castle and 8.5 turn motor and what pinion gear what size .and scream as its set off but when i put in reverse its fine. nose when set off . i am using brushed .till i sort it out but then brushless power here we come

[budgio]

Originally Posted by stampede vxlboy

what set up for my madrat i would i need i am using brushless mamba castle and 8.5 turn motor and pinion gear what size and scream as its set off but when i put in reverse its fine nose when set off . i am using brushed .till i sort it out but then brushless power here we come

Speak English boy !

[DCM]

Until I get the shocks working freely, not much point in playing too much, so far,

Front, kit locations, pistons drilled to 1.2mm, 35wt oil, B4 steering blocks.

Rear, kit locations, pistons drilled to 1.4mm, 30wt oil, nortech o-rings (make a hell of a difference)

Got loads of rear grip, lacks front end, been winding up the servo saver to make it more positive for now.

[budgio]

....

[rc_dan]

should of tried a search 1st ignore my post sorry guys

[SuperSparkSteve]

Originally Posted by stampede vxlboy

what set up would i need for my madrat i am using brushless mamba castle and 8.5 turn motor and what pinion gear what size .and scream as its set off but when i put in reverse its fine. nose when set off . i am using brushed .till i sort it out but then brushless power here we come

sounds like u dont have the pinion and spur gear meshed right, its either too close or too far apart.

[stampede vxlboy]

thanks super sparks what pinion people use for outdoor track. i can not do indoor track its hard to get there with all the buser . so i will be doing marley track on sunday

[jameswilkinson7]

Which motor are you wanting to run in your madrat on Sunday?