|
|
#1
|
|||
|
|||
![]()
Hi need some advice I have put together a Blaze/Shark (Pretty much shark spec!!) but I need to know what the best shocks are? I have done the truggy conversion if that helps
Thanks for all your help in advance ![]() |
#2
|
||||
|
||||
![]()
if you've got the LRP shark factory team, then stick with those, check out www.uk-microrc.co.uk for loads of set up advice.
most people tend to use the stock springs, with a massive range I use the Losi mini-t aluminium shocks, which are great as well. |
#3
|
|||
|
|||
![]()
As Mat has said, use the ST LRP shocks. Built right they are the shnizzle
![]() As a starting setup try 4 hole pistons all round, 60wt front oil, 50 wt rear oil, black springs all round. HTH
__________________
Previously: BRCA Micro Section Chairman. BRCA Micro National Champion. Currently: JQ fan. Bellend. Forums are better than Facebook groups ![]() |
#4
|
|||
|
|||
![]()
I have a Blaze conversion!! So god knows what shocks I have!! I have read somewhere that I should run the shorter front shocks all round is that correct?
|
#5
|
|||
|
|||
![]()
Im confused...You are asking what shocks are the best to buy for your converted ST right?
If so, see my answer above ![]()
__________________
Previously: BRCA Micro Section Chairman. BRCA Micro National Champion. Currently: JQ fan. Bellend. Forums are better than Facebook groups ![]() |
#6
|
|||
|
|||
![]()
Yes thats correct
|
![]() |
Thread Tools | |
Display Modes | |
|
|