4800 TrakPower lipos in B44?

[c0sie]

Anyone running the 4800 TrakPower lipos, or any other 30mm high LiPo in their B44?

If so, can you post some pics of the install please?

Thanks

[peetbee]

When I ran them in my B44 I used the diggety designs lipo cradle for these as it came with longer posts.
You should be able to achieve the same height effect with spacers and longer screws going up through the chassis.

I remember that both the link cable and the esc power wires needed to have the side exit male corrally connectors fitted to clear the bodyshell.

I may still have a photo of it at home, will look later.

[SHY]

Here U go:

http://www.ymr.no/10orTip1.htm

[peetbee]

Interesting Shy, I didn't find that the battery connectors fouled the body on my B44, so was able to run them like the D4 on your site.

[SHY]

I'm sure you're right. I use the D4 shell on my B44.

[peetbee]

Ah in that case the D4 shell can't offer quite as much clearance. I know when I changed to the J Concepts shell I gained more clearance than the original shell.