|
||
|
 |
|
||||||||||||||||||
|
|
|
#1
17-06-2009
|
||||
|
||||
rear shock mod kit fitted.......
any one fitted their rear shock mod yet? any pictures?
__________________ 
|
|
#2
22-06-2009
|
||||
|
||||
|
Hi Garry, pics of the kit fitted, you can see the difference with the white CAT (Std). Took ten minutes to fit! Who knows what it will be like indoors?!
 [/url][/IMG]You will have to excuse the funky full spikes! They are for polished wood floor at Faversham! Last edited by MHeadling; 22-06-2009 at 03:55 PM. Reason: pics
|
|
#3
22-06-2009
|
||||
|
||||
|
One of the new camber plate:
 [/url][/IMG]The inner hole is std fitment for the Phil Booth edition rear camber plate, there is not much clearence between the ball joint and rear out drive, if you are running diff savers it will be close or not fit!
|
|
#4
22-06-2009
|
||||
|
||||
|
Indoors, on carpet -> try it and if you don't like it, put std rear end back on
|
|
#5
05-08-2009
|
||||
|
||||
|
Does the update kit come with any setup advice, eg are you meant to extend/shorten shock shafts, change springs etc?
Asking as the Tamiya 511 has a very similar option, but no advice, and I really struggled to sort a setup!
|
|
#6
19-08-2009
|
||||
|
||||
|
It increases the rear toe in massively.. need to loose some shims on the rear.
What rear toe in are people generally using? People still running this mod?
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Schumacher
Hybrid Mode
