X6 Anti-Squat shims

[Chequered Flag Racing]

X-Factory X6 / Rear Hinge Pin Anti-Squat

1 piece shims in Carbon Fibre



Had some made up and been running them for over year now with out a problem.

Just back out the 2 lower chassis screws, undo the 2 screws that hold the toe-in block in place and slip in or remove a new shim to adjust the anti-squat. Kit will include a shim to replace the washers under the screws that hold the toe-in blocks in place. (when using the thickest shim the washers get in the way)

UK £10.50 shipped
USA $23.50 shipped
Europe €17.50 shipped

5 shims for anti-squat adjustment & 1 shim to replace washers used on toe-in bar (not shown)

0 deg = .150" or 3.81mm 0 deg = 3.8mm spacer or (2.3mm +1.5mm)
1 deg = .120" or 3.048mm 1 deg = 3mm spacer
2 deg = .090" or 2.286mm 2 deg = 2.3mm spacer
3 deg = .060" or 1.524mm 3 deg = 1.5mm spacer
4 deg = .030" or 0.76mm 4 deg = 1mm spacer
5 deg = no shims

UK based in the North East.

Have been racing since 1993

BRCA licence holder

PM or email if you want to get hold of some
(add X6 Anti-Squat Shimz to the subject line in email)

send payment to paypal @ [email protected]

[cutting edge]

What are they made of????
If they are required do we PM you ??

[Chequered Flag Racing]

Originally Posted by cutting edge

What are they made of????
If they are required do we PM you ??

sorry I missed that out

made from Carbon Fibre

pm or email please for how to pay if anyone would like a set

[cutting edge]

Sorry i think it was me had one to many Largers i can now see Carbon Fibre & Pm or email

[cutting edge]

Oh yer whats the delivery time expected ? Cheers

[AndyM]

Originally Posted by cutting edge

Oh yer whats the delivery time expected ? Cheers

also, where do yoo race?

if i were to buy, i might be able to get track side,

thanks

[Chequered Flag Racing]

Originally Posted by cutting edge

Oh yer whats the delivery time expected ? Cheers

see post 26

missed the dead-line on Friday

[AndyM]

these r instead of the lil plastic spacers arnt they?

sorry, im abit stupid

wot sizes r they? how many do yoo get in a pack?

thanks

[Chequered Flag Racing]

Originally Posted by AndyM

these r instead of the lil plastic spacers arnt they?

yes to replace the 'lil plastic washers'

Originally Posted by AndyM

sorry, im abit stupid

me to as I've missed out some info

Originally Posted by AndyM

wot sizes r they? how many do yoo get in a pack?

5 shims for anti-squat adjustment & 1 shim to replace washers used on toe-in bar. (see 1st post)

0 deg = .150" or 3.81mm 0 deg = 3.8mm spacer or (2.3mm +1.5mm)
1 deg = .120" or 3.048mm 1 deg = 3mm spacer
2 deg = .090" or 2.286mm 2 deg = 2.3mm spacer
3 deg = .060" or 1.524mm 3 deg = 1.5mm spacer
4 deg = .030" or 0.76mm 4 deg = 1mm spacer
5 deg = no shims

working on getting 0.75mm carbon to get as close to 4 deg as possible