|
|
#1
|
||||
|
||||
![]()
i am a new driver in italy, i wish learn which are the most used spares in the cat....
please let me know... excuse me for my bad english... ![]() ![]()
__________________
My Hamster "Leela" drive more better of me!!! |
#2
|
||||
|
||||
![]()
Hi Restimax, welcome to the SX
![]() I would get: - Medium flex wishbones, put them on straight away or wait until you break a std one. - Front shock shafts? - Wishbone hanger screws - A brace for the front hangers to stop them bending in a big impact You don't really need anything else, they are fairly bullet proof ![]() G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing |
#3
|
|||
|
|||
![]()
Spur gears?
|
#4
|
||||
|
||||
![]()
thanks all!!!
@ Northy you was a pred drivers some time ago? ![]() for the spur gear i have a incredible problem...with loose clutch i have broken the spur, the internal hole is fused and increased to 2mm of the nomal...my error because the slippery clutch was very loose...i think... because medium wishbone and not the standard? ![]()
__________________
My Hamster "Leela" drive more better of me!!! |
#5
|
|||
|
|||
![]()
As with most cars if your slipper is super loose you will just heat up the plastic and it will expand and soften, which will cause wobble and wreck the spur. Not sure if that is the Cat's problem or not though.
|
#6
|
||||
|
||||
![]()
That's right southwell, you need to pretty much lock the slipper otherwise it tends to loosen it's self off which heats the spur up and melts the hole in the centre
![]() Id say upgrade the gearbox tops to alloy ones aswell?
__________________
Schumacher Racing - Reedy - Schelle - TKR - Bandicoot Bodies - MIP - Nextlevelrc - Trishbits - Moss Models |
![]() |
Thread Tools | |
Display Modes | |
|
|