|
|
#1
|
||||
|
||||
![]()
researching power sources for unmodified predators i have found what may be only BRCA race legal hardcased and predator compatible LiPo saddle pack -> Robitronics 4600mAh 35c, 68.8 x 44.8 x 23.3mm. washers or similar required to boost height of battery bars, and the 44.8mm width is pushing the boundaries slightly? nevertheless closest feasible from the BRCA list. calculated to 161Amp peak? microtechracing.com c.£73!
|
#2
|
||||
|
||||
![]()
just mod it! ;p
|
#3
|
||||
|
||||
![]()
YUK! NO!
![]() |
#4
|
|||
|
|||
![]()
can yo use trakpower saddle lipos? i am using 3200's and 4800's . 3200's once you re-drill the chassis to move the post back . the 3200 will drop right in with out shimming the battery posts. i am only running the saddles because i have saddle lipos and no other car i have runs saddles.
__________________
RC US Imports - Sworkz USA- Maclan Racing- Bellgate Distributors. |
#5
|
||||
|
||||
![]()
The mods are worth it and are really easy. I would think about doing the mods and running a stick pack.
__________________
Lets Off Road! |
#6
|
||||
|
||||
![]()
*fingers in ears, singing "i can't hear you!"*
modify your driving! |
#7
|
||||
|
||||
![]()
don't forget that the original predator was designed to have stick pack cells down one side of the car-the saddle pack setup was an evolution due to the weight of the cells.The original car was very difficult to jump well.
Stick pack lipos redress that un balance and the chassis is back being used as it was designed to be usednow. Break out the dremel and do the mod-your car willbe better for it! |
![]() |
Thread Tools | |
Display Modes | |
|
|