|
|
#1
|
||||
|
||||
![]()
Hi there, I'd just like to ask for a bit of advice with regards to offroad racing.
I have tried to read up on a few models for offroad and as a relative beginner (Currently race indoors only on carpet track 1/10 and v12 circuit) i fancy having a go off-road. Now advice i've seen/read so far is that its best to go 2wd as a beginner, 6.5/7.5t brushless. What i'm a little confused about is what model car to go for in order to have a simplistic car, but also being competitive. The conclusion i've come to so far is a B4FT. That sounds like one of the cheapest and most competitive solutions to me. But is it? Any input/advice would be greatly appreciated. Dan
__________________
Because obviously you want to know what i'm running!! ![]() Xray, Zen Maclan, Surpass, SRT, Futaba MUST GO FASTER!!
|
#2
|
||||
|
||||
![]()
Whilst I wouldn't say that 2wd is better than 4wd, the 2wd is likely to be the cheapest option.
Either a B4 or an XXXCR would be competitive, B4 is more popular so there's a good chance that someone you race with would be able to help with setup and parts if you get stuck. A 7.5 is ample for 2wd especially if you're running lipos |
#3
|
||||
|
||||
![]() Quote:
|
#4
|
||||
|
||||
![]()
Yeah i thought the b4 was prety popular and a relatively good choice. cheers peetbee.
As for the 7.5 and lipo, yeah thats pretty much what i was gunning for. I'll just take it easy when getting used to the car or it'll end up in bits ![]()
__________________
Because obviously you want to know what i'm running!! ![]() Xray, Zen Maclan, Surpass, SRT, Futaba MUST GO FASTER!!
|
#5
|
|||
|
|||
![]()
I run a b4 with lipo and find that a 8.5 is fast for me, might be worth looking at the xcelorin because it is a cheap unit. I know that they have had there problems because I have had them to, but now have them sorted out. And race the car with no problems touch wood, but break it crashing hard
|
#6
|
||||
|
||||
![]()
I was thinking of the xcelorin actually
![]() Cheers Tom
__________________
Because obviously you want to know what i'm running!! ![]() Xray, Zen Maclan, Surpass, SRT, Futaba MUST GO FASTER!!
|
#7
|
||||
|
||||
![]() Quote:
Look on the set up sheets and try some of the setups and one will suit your style of driving. The Losi system is good as well and cheap as chips so would be a good option, I use the Novak GTB and a 7.5 Orion Vortex which is great for club and regional events. Im still learning but enjoy it less messing around with skimming etc. ![]()
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#8
|
|||
|
|||
![]()
don;t rule out an RB5 if you plan to do 2wd. A second hand one won't set you back too much. Spares are reasonable, but you won;t need many as it is built like a tank, ideal for people new to offroad. Also handles great, takes the best bits from the B4 and the Losi CR together.
__________________
4wd - X4TE 2wd - X2C (Mad Rat passed down to son!) Ansmann Racing UK RIP - MicroTech Racing Trader Feedback |
#9
|
||||
|
||||
![]()
cheers welshy. Looking more and more like the B4 and xcelorin will be my weapons of choice. (i used to use yuasa batteries) lol
__________________
Because obviously you want to know what i'm running!! ![]() Xray, Zen Maclan, Surpass, SRT, Futaba MUST GO FASTER!!
|
#10
|
||||
|
||||
![]()
ahh, b4 RB5 and cr in the mix....hell i dunno
![]() ![]()
__________________
Because obviously you want to know what i'm running!! ![]() Xray, Zen Maclan, Surpass, SRT, Futaba MUST GO FASTER!!
|
#11
|
||||
|
||||
![]() |
#12
|
||||
|
||||
![]()
You really can't go wrong with a B4, and when you want to go really quick you can upgrade to an X6
![]() |
#13
|
||||
|
||||
![]() Quote:
Shells - you can buy ready painted ones from associated for £20 which is a bargain. Cheap and cheerful. Yuasa, yup what fun that was getting the results with those cells. ![]()
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS |
#14
|
||||
|
||||
![]()
A mates dad used to (and still does work for them) we tried seeling them at the club but no-one wanted them lol
__________________
Because obviously you want to know what i'm running!! ![]() Xray, Zen Maclan, Surpass, SRT, Futaba MUST GO FASTER!!
|
![]() |
Thread Tools | |
Display Modes | |
|
|