ko propo and hi-tec

[paulc]

hi guys

right i have a ko propo universe transmitter and reciver 2.4 ghz and was going to use a hi-tec hs-645 servo but it just twitches like mad also tryed it with a ko esprit (the gold one) and a 302 reciver doe's excally the same are these not compatable togther ???

cheers paul

[super__dan]

Originally Posted by paulc

hi-tec hs-645 servo

IMHO

[RogerM]

I have run MG645s as throttle servos in 1/8th with KO gear without problems.

I have the opposite opinion to Dan regarding HiTec servos and run them exclusively in all my cars (and have done for something like 8 years) except the FS which has a Futaba 9550 in purely to make instalation easier.

[Bungleaio]

The hs-645 might not be digital which could be why you're having problems. my futaba 3pk won't work with analogue servos.

[sosidge]

Originally Posted by super__dan

IMHO

+1

Making it 2-1 to the "don't ever waste your time with a Hitec servo" camp.

Unless you are running the KO radio in high-response mode, there shouldn't be any problems.

Hitec servo's are just terrible. Invariably if a car has a radio problem, there is a piece of Hitec equipment in there somewhere. Stick with real Japanese quality brands like KO, Futaba and Sanwa.

[super__dan]

Excellent Rog, just to keep up with our, "I couldn't disagree with you more..................."

[paulc]

thanks for the replys guys the hi-tec servo was just to get the 1/8 up and running but did'nt work so have a savox on the way give that a try any comments on the savox servos

cheers paul

[rcracer]

Strange i ran a hitec in my S4 for a full season without an issue and infact have one for my throttle servo right now in the 8th also without a problem.