rb5 worlds

[Jez]

just rebuilding rb5 for nrx and unsure which way round rear wishbones go.are they same way as in rb5 manual or not.havent got worlds leaflet.thanks for any replies,jez.

[Fabs]

They go like on the normal RB5 but there's 3 holes for the shocks.

Don't forget to put a screw in the outer hole at the back of the wishbone to strengthen it.

[Jez]

Originally Posted by Fabs

They go like on the normal RB5 but there's 3 holes for the shocks.

Don't forget to put a screw in the outer hole at the back of the wishbone to strengthen it.

thanks very much.

[Northy]

Originally Posted by Fabs

They go like on the normal RB5 but there's 3 holes for the shocks.

Don't forget to put a screw in the outer hole at the back of the wishbone to strengthen it.

What's this screw business all about?

G

[hopsing]

Originally Posted by Northy

What's this screw business all about?

G

You run a screw through the middle hole of the "looped" shock mounting location on the mid arms. You should have a spacer in there as well (like if a shock were mounted in there). It helps strengthen the arm in that area. It is fairly well known among K-car drivers that the arm can break right through that section if you catch a pipe just right with the rear tire.

[Northy]

OK boss, but middle hole or outer hole? Fabs says middle.....

G

[hopsing]

Originally Posted by Northy

OK boss, but middle hole or outer hole? Fabs says middle.....

G

I said middle......didnt I? Fabs said outer. Everyone I know does it through the middle hole...