|
||
|
 |
|
||||||||||||||||||
|
|
|
#1
31-03-2009
|
||||
|
||||
x6sq rear wishbone on old x6
i have an old x6 and have got a crack on one of my rear arms, and out of spares on that side now
so was wondering if i put the new x6sq wishbones on, do i need to change anything else or won't they work cheers pete 
|
|
#2
31-03-2009
|
|||
|
|||
|
Quote:
I wouldnt risk it just buy some new ones most of the power will come from the rear end the wishbones have alot to offer
|
|
#3
31-03-2009
|
||||
|
||||
|
Even though I trust what vinny has to say here is my answer.....
You need to change the tower too to keep the shock wheel rates the same  G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing 
|
|
#4
31-03-2009
|
||||
|
||||
|
i am changing it
i what to know if the new one's work on the old car because the sq one are different to the old one's
|
|
#5
31-03-2009
|
||||
|
||||
|
o right didn't know the tower had changed
|
|
#6
31-03-2009
|
||||
|
||||
|
Yup, the 2'ed bones have no kink in them, so the tower had to change to get the same shock angles.
G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing
|
|
#8
31-03-2009
|
||||
|
||||
|
may just see if i can get some old ones for now
cos the cars great at the moment
|
 |
| Thread Tools | |
| Display Modes | |
|
|
X-Factory
Hybrid Mode
