Homemade mid motor xxx

[Cannabum420]

I pulled an all nighter and came up with this thing, took about 4 hour to complete, all parts are losi, some have been cut and trimmed to fit, but all losi

[ashleyb4]

Thats cool i wish i had the nurve to attack my b4 with the dremmel to make it into a mid mounted car.

A

[Cannabum420]

you should just get the x-6

[Chrislong]

Looks good, but what about the bracing? Your rear end will be as floppy as a flip flop without any additional bracing.

Also, your motor will need to run backwards now, but don't just turn your bellend 180degrees as then your timing will be retarded and not advanced. It'll all run extra hot even once you got the motor timing right for the direction.... that why you ought to cut the gearbox, and put the layshaft in from the other side and monted the motor plate on that side too.

Crack open the Pro-plus & have fun

[Stu]

Originally Posted by Chrislong

.....turn your bellend 180degrees ......& have fun

Funny, Chris, you are a star.

[Cannabum420]

im just going to solder postive to negative, and vice versaas for a brace, I just made one out of and aluminum post, and a cut battery strap, it seems pretty durable. i'll keep ya posted on it handles

[xx4-nutter]

Originally Posted by Chrislong

Looks good, but what about the bracing? Your rear end will be as floppy as a flip flop without any additional bracing.

Also, your motor will need to run backwards now, but don't just turn your bellend 180degrees as then your timing will be retarded and not advanced. It'll all run extra hot even once you got the motor timing right for the direction.... that why you ought to cut the gearbox, and put the layshaft in from the other side and monted the motor plate on that side too.

Crack open the Pro-plus & have fun

chris you swore lol

[Cannabum420]

here this is the brace i just made