One way diff roller bearings

[Chrislong]

http://www.jespares.com/radio-contro...6x10x12mm.html
Edit: Although listed, JEspares won't be stocking these due to supplier only able to supply in bulk. I have sourced these myself, and due to cost I will be selling these myself rather than the shop. (I have to get some for myslef, so have ordered extra incase anybody else needs some)

At weekend I had a one way diff bearing collapse, not only did it collapse but it also de-bonded from the alloy housing! So it was well and truly slipping. I check them after every run, so all this had happened in 1 run!!!! mental, but I was using the diff to correct it when rolling which is rather harsh...

The link above is the same bearing as used in the Schumacher one way diff, 6x10x12mm. They are quite easy to replace, I'll be doing a guide on the JE spares website shortly when I come to fix my own one way. We don't currently have stock but will shortly be getting some in.

[Southwell]

Find me the Losi ones and ill love you forever

[Chrislong]

Hey Ian, well I don't have any here to measure but if you can provide the measurements its highly likely we will be able to source them from our supplier

(BTW I owe thanks to Lyndsay Skelding for measuring my Cat SX bearings, I didn't have any callipers with me at weekend - and didn't realise JE Spares stocked this stuff (although listed as Helicopter spares), thanks mate)

[Southwell]

Awesome, ill have an ask about and see if anyone has any unbuilt one ways so i can measure them.

Cheers dude.

[MattW]

From memory i think the Losi ones are from the same manufacture, and "the next size down". They aren't all that difficult to get hold of, i have some at home in my old xx4 spares box. I think they are probably the same size as is used in the Cat SX layshaft one way.

[Chrislong]

Originally Posted by MattW

I think they are probably the same size as is used in the Cat SX layshaft one way.

If you know how to get the layshaft one way bearing out, can you let me know. It seems well bonded, I have a one way layshaft which has a dead bearing in it.