|
|
#1
|
||||
|
||||
![]()
Nejust bought my first Yokomo Yz2 CA
My RC knowledge is very limited, the spur gear and pinion doesn’t look very well matched, I’m currently running a 10.5 motor, the pinion is a 48p 19T, to me the sour gear looks a bit used. Or am I wrong and just need to mesh it better, I haven’t ran it yet, nor spent any time meshing it as I thought it may need replacing. Last edited by Shaundesigner; 09-02-2019 at 02:03 PM. |
#2
|
||||
|
||||
![]()
I'm not convinced that's a kit spur. I've known of slipper issues when using off-brand spur gears, due to thickness. kit spur us 80 tooth.
Kit pinion is a 22 tooth, which is fine for 7.5/6.5 motors. With a 10.5 turn, you want to be at a 24/25 really.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#3
|
||||
|
||||
![]()
Tbh I don’t think it would be a kit spur, the guy I bought it off has changed a few bits, of which he’s given me lots of spares, I would like to work out what’s the standard bits etc then put it back to stock.
I’ll get a new pinion, the car has different arms (gul arms) is this a good idea to keep it put back to stock? |
#4
|
||||
|
||||
![]() Quote:
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models --------------------------------------------------------------------------------------------------------------- |
#5
|
||||
|
||||
![]()
Predominantly run on high grip carpet, the tower has been changed and has the appropriate one for the arms
__________________
Newbie Yokomo Yz2 CA driver |
#6
|
||||
|
||||
![]()
__________________
Newbie Yokomo Yz2 CA driver |
![]() |
Thread Tools | |
Display Modes | |
|
|