|
|
#1
|
|||
|
|||
![]()
Came to charge my lipos for the first time in a while and one says warning battery error as soon as I press charge. Any ideas how to get it back up and running?
|
#2
|
||||
|
||||
![]()
Sounds like its dropped below the minimum voltage, check you can't change that setting on your charger. there are a couple of things you can do, both are dodgy and Ive never done , so Im not going to advise you at the risk of being shot down on here
![]()
__________________
Dave www.norfolkbuggyclub.moonfruit.com kyosho optima,Bosscat,Boomerang,,RB5 Vega,RB7,,RC12 5.2, TLR22-4,MP9,HB807T Flask of tea & a rollup Anglia model centre & CT Models http://www.oople.com/forums/showthread.php?t=28117 |
#3
|
|||
|
|||
![]()
I've had a look and tried cycle and balance and nothing worked
|
#4
|
||||
|
||||
![]()
I have in the past charged them on a ahem, cough, nicad charge outside in a fireproof bag just in case for about a minute to a minute and a half at a time. Not advocating doi g this, just saying.
|
#5
|
||||
|
||||
![]() |
#6
|
|||
|
|||
![]()
Use the battery check function on your charger to see what voltage all the cells are at.
If they are all slightly to low a kick start as per lee1972 should work, if it's just one, try the same method. But you might have a failed cell. So be careful. |
![]() |
Thread Tools | |
Display Modes | |
|
|