Bosscat 21t pulleys

[Mrmoots]

Hi

First post on here. Started to tinker again with a few old Tamiyas a couple of years ago reliving my youth, it's now grown to a Bosscat, rc10 and yet more Tamiyas!

Have got round to the Bosscat I brought and found that one of the layshaft pulleys is damaged. It's part number U1294p. I have had a look on most online resources and cannot find anything available. Is there an alternative Schumacher or other suppliers can use or adapt?

Strange thing is the layshaft, it's a bosscat sport without a slipper, only has one hole for the spur gear and one for one pulley, not two as per the instructions. Maybe it's a 2wd layshaft? Not too worried by this as can drill another hole for the pin.

Any help appreciated, would post some pics if I could work out how to on the iPad!

Thanks

Ross

[Retro RC]

Odd looks like you May have the layshaft out of a big 6 or club 10 mk2 part number u227. You need this 1 part number u277

http://m.ebay.com/itm/NEW-SCHUMACHER...%257Ciid%253A2

[Mrmoots]

Thank you for that. Ordered that lay shaft as it's cheap enough and saves drilling a third hole in the current one.

Just looking for two U1294P's now

Thank you

[Peakey]

http://www.hsc-modell.ospan.de/produ..._id=34692&pn=0

[Mrmoots]

Brilliant

Thank you

[Mrmoots]

1c231739-3e58-41d0-af0a-b4958afeb6a8.jpg

32b2c9e2-1322-429a-831f-e24a7ce46ea8.jpg

Picture of the original layshaft with a single hole, must be for a 2wd car.

whilst its all apart I thought I should replace the toothed pulley. On one of them then teeth have started to to deform.

Ross