|
|
#1
|
||||
|
||||
![]()
HI All
Can anybody recommend a good tyre glue. I preffer glue that is thin and runs round the wheel freely. Over the years I have been using 2 different glues which were very user friendly and I could literally lift the tire at 1 point pour in the glue and it would go half way round the wheel in seconds and then I would flip the wheel and pour glue in from the opposite point and job done, recently I am still using the same glues BUT I the glue doesn't run??? I need to go round every millimeter of the wheel with the glue as the glue does not run round freely, I also need to squeeze the living daylights out of the tube to get the glue out??? Has something changed that I have missed??? Help please. ![]()
__________________
SEMCS - Nemo Racing - LMR - Ralls Racing Yokomo Yz-2 / Yz 4SF - Orion Savox - Xpert - Sanwa - Puppy Paint Email: [email protected]
Tel: 07774 472531 Feedback Here http://www.oople.com/forums/showthread.php?t=138544 |
#2
|
||||
|
||||
![]()
Nothing wrong with your technique, I do the same. You just need Corally thin tyre glue, very thin and simply awesome:
Alternate might be RDRP which I have used successfully as well. http://www.dms-racing.com/index.php?...ategory_id=194 http://www.dms-racing.com/index.php?...ategory_id=194 |
#3
|
||||
|
||||
![]() 101999 - HPI Ultra-CA Tyre Glue (20g) Great stuff £3.79 a bottle really thin runs as you said. Also comes with a pin top designed for unblocking the nozzle which invariably happens.
__________________
Yokomo YZ2's. CaL2 and DTM2. Kyosho lazer zx Cat 2000 RC10 Worlds RC10 B3 Cougar 2's Topcat Tamiya DT02 - use as a door stop. Tamiya TL01 - paper weight. Tamiya Mini - awesome fun to race THR - Tudor-Hart Racing - Custom RC products - find us on Facebook. SHRCCC Committee Member- Track features - design and build. Returning racer after 25 year break - miss my Optima Mid Custom Special, but not brushed motors & SCE cells. www.shrccc.co.uk |
#4
|
|||
|
|||
![]()
Having never glued a tyre in my life I bought this stuff and it worked a treat and is thin
https://www.rccarshop.co.uk/wheels-t...ro-tyre-glue-p |
#5
|
||||
|
||||
![]()
You could try "ZAP CA " super glue , it comes in a pink bottle and tends to be super runny , beware though as you probably will end up glued to the tyre as the stuff has a habit of actively seeking out skin and bonding to it twice as quick as it would anything else
__________________
THE FLEET -RC10 gold pan (racecar) -associated B4 (little brothers car) -Ansmann master smacker (in bits) -handmade 1/12 scale lorry (in bits) -handmade 1/87 RC lorry -1992 honda transalp (£700 bike, but that's ok as its a big V-twin) |
#6
|
||||
|
||||
![]()
Bob Smiths is what i use and never use anything else
This is a very thin glue that you will find no problem with it running around your tyres ;It also bonds within a few seconds and super hold super strength. I have had a part of a tyre come from the rim in 7 years and this was probably where i re missed the glueing in the first place http://www.ebay.co.uk/itm/Bob-Smith-...MAAOSw8gVX7AV2
__________________
|
![]() |
Thread Tools | |
Display Modes | |
|
|