|
||
|
 |
|
||||||||||||||||||
|
|
|
#1
15-01-2009
|
||||
|
||||
CORE-RC UDC20 WHAT LEAD ?
At present i'm using the UDC20 charger from Core-rc does anybody know what lead i need to charge orion,trakpower or lrp Lipo's ?
Part/no would be great 
__________________
Stevie Brew [email protected] http://www.oople.com/forums/showthre...hlight=stegger 
|
|
#2
15-01-2009
|
||||
|
||||
|
Charge = ones in the box, balance = phone trakpower and they will tell you what lead you need.
__________________
 Nortech is ACE!
|
|
#3
15-01-2009
|
||||
|
||||
|
Just cut one of the leads you aren't using and wire up the bullet connectors, or wire up a "Bullet" to "Deans" from the battery and use that
|
|
#4
15-01-2009
|
|||
|
|||
|
this what your after......
Or even better go here: http://www.racing-cars.com/products.asp?recnumber=22576
New part just become available, so should make life sooo much easier for you, and will soon be in model shops 
__________________
Schumacher Racing, Core RC, Speed Passion, Sorex, EDS, KO Propo, Nosram, Arrowmax, Thunder Power, Contact RC, Hobbywing, MIP, MR33, Intellect
|
|
#5
15-01-2009
|
|||
|
|||
|
Are the output connectors to the battery side of these chargers 4mm bullet sockets? They sell a nice cable set which would be handy with my bantam b6 if same plugs.
Also is this just a rebranded imax b6 as the form factor + menus + specs look really similar...
|
|
#6
15-01-2009
|
||||
|
||||
|
Cheers boys, mark you have a PM
__________________
Stevie Brew [email protected] http://www.oople.com/forums/showthre...hlight=stegger
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
