|
||
|
 |
|
||||||||||||||||||
|
|
|
#1
19-04-2016
|
|||
|
|||
To seal? Out not to seal?
Do folk seal the inside of their shells?
What does it do for you? Abrasion resistance? What would be suitable to go over fascolor paint? Thanks 
|
|
#2
19-04-2016
|
||||
|
||||
|
Halfords clear lacquer, I'm just about to do one just now.
|
|
#3
19-04-2016
|
|||
|
|||
|
Thanks for replying.
Did it make them last longer?
|
|
#4
19-04-2016
|
||||
|
||||
|
Yes, stops the paint getting easily scratched off.
|
|
#5
19-04-2016
|
||||
|
||||
|
Yeah I seal my pro painted with clear plasticote available from hobbycraft.
It seals them from water damage, and makes them a lot more resistant to scratches.
__________________
-------------------------------------------------------------------------------------------------------------------
Team Yokomo - YZ-2CAL3 | YZ-2DTM3 | YZ-4SF2 | YZ-2T | YZ-2DTM Worlds | YZ-2DTM x2 | YRX-12 x2 ------------------------------------------------------------------------------------------------------------------- 10electric | Batley Buggy Club | YORCC | RHR | MB Models ---------------------------------------------------------------------------------------------------------------
|
|
#6
19-04-2016
|
||||
|
||||
|
Likewise. Currently using clear lacquer from somewhere other than halfords (can't remember brand) but works just as well.
I then tend to stick a bit of gaffa tape over bits where paint may be rubbed such as front bulkhead, where battery wires stick up etc as this helps protect it further
__________________
I've got Araldite and a Swiss Army Knife - what more do I need? Yokomo YZ-2 No 4WD because nothing lives up to my original Optima. Until now maybe?...
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
