|
||
|
 |
|
||||||||||||||||||
|
|
|
#1
13-03-2016
|
|||
|
|||
My Collection
Peaky mentioned i should post a thread of my cars, so hear they are. All are race cars, not sat on shelf cars like some of the pristine examples on here, but bring fond memories. My lack of car building skills probably mean they will stay like this, but at least i managed to convert the yr-f2 back to it's former self after my dad converted it to pull a trailer
 Yokomo YR-F2 Special (My Dads) Looks like it's got some alloy hop ups       Yokomo 93WCS (apparently) Some experts on here tell me it's the rare 93WCS, all i know i never liked racing the thing, felt big and slow to me  . Picture of the parts or what i believe are the standard parts that my dad must have swapped for the carbon ones.          Losi XX My favorite ever car, many wins with this baby, lots of graphite and alloy as you can see, not sure if it's a CR i know we tried the CR bit at one stage but i think we took them off again as didn't like the changes.       Corally F1 Another fun car to drive, as you can see by the number on it, a number of wins with this baby, putting a 10x2 in it and watching it skip down the straight was awsome       Schumacher Mission (i think) Not sure if this was even my dads or not, but kept it as it all works and i can test stuff in it       predator streetwise Always wanted a pred but the buggies are too expensive so got this. Pretty happy with it obviously prefer a buggy but still has the cool shocks and is in good condition Last edited by daz75; 29-01-2018 at 07:54 PM. 
|
|
#2
15-03-2016
|
||||
|
||||
|
Looking good Daz
 nice collection, you need to sort that yoke out get the right inder tray and front bumper and it will look so much better. That graphite top deck is off a 91/92 nothing to do with the car 
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863
|
|
#3
15-03-2016
|
|||
|
|||
|
very nice collection! I love this Yokomo 93WCS, good stuff
__________________
http://alldeco.pl/fr/ Last edited by roberto.micks; 26-04-2016 at 09:35 AM.
|
|
#4
15-03-2016
|
|||
|
|||
|
Quote:
Is this the correct one? Only seem to be able to find ones from Oz http://pages.ebay.com/link/?nav=item...962970&alt=web
|
|
#5
15-03-2016
|
||||
|
||||
|
It shouldn't drop to bits buddy and we're all here to help if it does. Pete is the guys name I've got a couple of his and there good but you need this one
http://m.ebay.com/itm/vintage-yokomo...087?nav=SEARCH
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863
|
|
#6
15-03-2016
|
|||
|
|||
|
Quote:
Says 94 to 97 as the year on that one??
|
|
#7
15-03-2016
|
||||
|
||||
|
The 93WCS was the 94 prototype basically but yours has been converted to a 94 anyway.
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863
|
|
#9
02-04-2016
|
|||
|
|||
|
Peaky my man, some questions.
I've come to fit the undertray today and it seems miles too wide, the shell no where near fits and it doesn't look like the picture you posted. Not sure which bit needs trimming and how it will make any difference to the width. It's also close the the motor i assume i need to remove that? The old under tray was attached with with 2 screws right at the front, then w more underneath at the front then 4 at the back, the screws don't look original i assume it's best to just stick em back in? Some pics below will hopefully show what i mean      
|
|
#10
02-04-2016
|
||||
|
||||
|
Dude your car is giving me the shakes!!! Missing screws and wrong parts 😫 If you want to send it to me I will gladly strip, clean and rebuild it for you. As for the undertray if you look at the left rear side of mine the edge has been cut away from the bottom so it moves giving the clearance for the body. It is the right tray as the others won't fit Cus they were for different chassis.
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863
|
|
#12
03-01-2017
|
|||
|
|||
|
losi xx looks awesome some great track kings :-) ive been racing rc10s last few years but just sorted a losi xx for the coming year is my favorite buggy to and was the last buggy i raced 20+ years ago till i came back to racing few years ago.
|
|
#13
03-01-2017
|
|||
|
|||
|
Quote:
|
|
#15
03-01-2017
|
|||
|
|||
|
Worth a try
However I have to say the XX looks awesome!!
|
|
#16
12-01-2017
|
|||
|
|||
|
I'm thinking of putting and 8.5 motor in my Losi is this too hot ( think I may have asked this before but can't find it) if not what pinion is it OK to use the same pinion chart as my 22 3.0 or should I be going lower
22 pinion in 3.0 manual had a 17 pinion on the brushed Motor that was in it
|
|
#17
12-01-2017
|
||||
|
||||
|
Do you have the hydra drive? If yes use that and should be spot on with that motor. Im unsure on ratios though.
__________________
www.kamtec.co.uk www.fibre-lyte.co.uk answer-rc.com/uk/en/ Answer UK team driver Designer of the Lazer ZX/ZXR carbon fibre tub chassis Designer of the Lazer ZXRS
|
|
#19
13-01-2017
|
||||
|
||||
|
Quote:
__________________
My feedback feel free to add anything http://www.oople.com/forums/showthre...863#post861863
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
