|
|
#1
|
||||
|
||||
![]()
Hi guys i recently picked up a yz10 and a bosscat. Im in the process of rebuilding the yz10, and the front lower bulkhead has broken, that holds the shock tower on. Looking for a replacement new or used. I got a tub full of spares too, but that's the only bit i don't have. Lol. Also i was told it was a 94, but if you guys could confirm this as im not 100% because i think the top deck is fibrelyte and i have several different types of shock towers. Any help is much appreciated. (Photos should be attached)
Cheers Mitch
__________________
Mitch Fiddling Team Schumacher: K2, KC, SV2, MI6 EVO Vintage Rides: Schumacher Fabiix, Losi XX CR, B2, XRS, xk98 x2, Procat, Bosscat Works, Cat 2000 EC'S, Yokomo YR-4 II, Kawada M300, XX4, Cougar 2, Schumacher Fireblade and many many more... Trader Feedback: http://www.oople.com/forums/showthread.php?t=150252
|
#2
|
||||
|
||||
![]()
Welcome Mitch I've already seen this and yes it is a 94 with carbon towers and top deck which is either Fiberlitye or CML. Looks like a good base with the all important TCS and what looks like works 93 turnbuckles 😉
My advice would be to strip it and give it a good clean it should clean up well, then see what it needs. I should have a spare bulkhead I'll check and see what I have. Looks like you need a rear tower too but like I said see what else it needs if anything.
__________________
My feedback feel free to add anything ![]() http://www.oople.com/forums/showthre...863#post861863 |
#3
|
||||
|
||||
![]()
Cheers Peaky, yes i am going to strip it this week and see if it needs anything else, there are a few little things but Stu said he might be able to sort me out with a few bits im missing.
Will keep posting updates, Cheers Mitch
__________________
Mitch Fiddling Team Schumacher: K2, KC, SV2, MI6 EVO Vintage Rides: Schumacher Fabiix, Losi XX CR, B2, XRS, xk98 x2, Procat, Bosscat Works, Cat 2000 EC'S, Yokomo YR-4 II, Kawada M300, XX4, Cougar 2, Schumacher Fireblade and many many more... Trader Feedback: http://www.oople.com/forums/showthread.php?t=150252
|
#4
|
|||
|
|||
![]()
any ideas on the part number for the bulkhead?
|
#5
|
||||
|
||||
![]()
No sorry bud, think ive found the right manual online but it doesn't show any parts numbers.
__________________
Mitch Fiddling Team Schumacher: K2, KC, SV2, MI6 EVO Vintage Rides: Schumacher Fabiix, Losi XX CR, B2, XRS, xk98 x2, Procat, Bosscat Works, Cat 2000 EC'S, Yokomo YR-4 II, Kawada M300, XX4, Cougar 2, Schumacher Fireblade and many many more... Trader Feedback: http://www.oople.com/forums/showthread.php?t=150252
|
#6
|
||||
|
||||
![]()
There's a manual here but as for part numbers there not great
http://www.competitionx.com/pdf/vehi...-10-manual.pdf
__________________
My feedback feel free to add anything ![]() http://www.oople.com/forums/showthre...863#post861863 |
![]() |
Thread Tools | |
Display Modes | |
|
|