Speed Passion Reventon Pro 1.1EX help

[Tobyw]

Hi,

Hoping someone can help me here.

I have the above ESC and have loaded the STCK0 firmware (blinky mode) onto it and yet it wont power up on a 1s lipo. All the websites and even SP themselves say that the speedo is compatible with 1s lipo.

Any ideas? It powers up on any other profile with a 2s lipo just fine. Before you al say..Yes, I have tried several sets of 1s in case it was flat...

Please help

Cheers
Toby

[david85williams]

Hi Toby. I always thought the Reventon Pro was 2s only....

[david85williams]

The Reventon Pro EX model does 1-2s, not the 'normal' none EX version.

[knighthawk]

Toby,

I run the same esc in my GT and now Atom

From memory I had the same problem to start with, I powered it up with a 2s lipo and turned off lipo cut off as this was set at 6v on 2s and 1s is 3.7v so it wouldn't power up then checked all the other settings and powered down.

Re-powered with the 1s and all was fine

[Tobyw]

Originally Posted by knighthawk

Toby,

I run the same esc in my GT and now Atom

From memory I had the same problem to start with, I powered it up with a 2s lipo and turned off lipo cut off as this was set at 6v on 2s and 1s is 3.7v so it wouldn't power up then checked all the other settings and powered down.

Re-powered with the 1s and all was fine

Thanks Ill give this a try

Toby

[Tobyw]

Originally Posted by Tobyw

Thanks Ill give this a try

Toby

Turned "protection off" and its still the same. I am using the software on a laptop rather than prog box thou. Surely shouldnt make a difference??

Toby

[Tobyw]

Originally Posted by david85williams

The Reventon Pro EX model does 1-2s, not the 'normal' none EX version.

Hiya,

Yeah mine is the EX version

Cheers
Toby