Alluminium wheels on the bay ?

[dayxwalker]

Seach for b4 and you will find them sorry no link am on my iPhone. What do you think ? Will they just buckle easy ? Would look nice mind ! My b4 is way to light so can handle the increase weight !

[jono83]

http://cgi.ebay.co.uk/TEAM-ASSOCIATED-B4-5-SPOKED-ALLOY-WHEELS_W0QQitemZ260341951212QQcmdZViewItemQQptZUK_ ToysGames_RadioControlled_JN?hash=item260341951212 &_trksid=p3286.c0.m14&_trkparms=72%3A1298|66%3A2|6 5%3A12|39%3A1|240%3A1318


link

and these
http://cgi.ebay.co.uk/TEAM-ASSOCIATE...3A1|240%3A1318

[josh_smaxx]

Oooooooooo, nice. Do you just glue them normally? coz there not beadlocks

[jono83]

Originally Posted by josh_smaxx

Oooooooooo, nice. Do you just glue them normally? coz there not beadlocks

i was just thinking the exact same thing i dont no if the glue would bond to the alu properly

[terry.sc]

Durability depends purely on what aluminium alloy has been used to make them.

In the late 80s alloy wheels were a popular upgrade, being a lot stiffer than the wheels we were using at the time. Raced for ages using RW Racing alloy wheels back then with no problem, bought some modern copies the other year and destroyed two of them in one race.

A silicone adhesive or Shoe Goo will stick the tyres to aluminium no problem if cyano doesn't do the job.

[dayxwalker]

They look like he's made them himself with a lathe ! Out of billet ? I suppose you could ask him what grade material and look up the yeild strength on the net ! They would be nice if they where strong enough ! I had some proline plastic ones and they were not round when new ! But with them being light the inertia at speed will not be to bad but if they were ally an bent the inertia would be higher and would vibrate the car to bits

[SHY]

This reminds me... I'm still looking for "set up wheels". With a dish at the outer edge, with a groove and an O-ring. For measuring camber accurately!

Anyone seen anything like this?