Servo Saver for Schumacher KF2

[Shuntfield]

Hello

Can anyone suggest a servo saver that fits the Schumacher Cougar KF2 SE. I have bought one already and it doesn't fit the space available, and I do not want to have to keep changing servo gears!

Any help appreciated!

Thanks

Graham

[Maskellator]

Keen to know also. I modified a Tamiya high torque one. Works fine, but you do need to grind some of the top bulkhead for clearance. I suspect you would have to do this for any decent servo saver...

[mark christopher]

get a good quality, strong servo, never run a servo saver since the sv, and never done a servo, and I crash well

[Shuntfield]

Yeah I tried that, I have a Savox 1252mg with a set of really nice smooth gears in it...

Stripped to hell, I really need a saver!

Graham

[cmgreen]

same happened to my savoy, no props with a KO

[luniemiester]

Originally Posted by Shuntfield

Yeah I tried that, I have a Savox 1252mg with a set of really nice smooth gears in it...

Stripped to hell, I really need a saver!

Graham

The low profile savox servos do strip gears easy - I've ran the 1256/57/58 in all my cars and never stripped a servo gear in any of those servos but the one meeting I did with the yz2 and a 1251 I stripped the gears with an innocuous crash so out that came and the trusty 1257 went back in

[mark christopher]

Originally Posted by Shuntfield

Yeah I tried that, I have a Savox 1252mg with a set of really nice smooth gears in it...

Stripped to hell, I really need a saver!

Graham

as I said get a decent strong servo, the 1251/1252 is a touring car servo and not strong enough for a buggy

[Shuntfield]

Ah OK

So perhaps the servo change then?

Any recommendations would be very helpful. I see in the thread we have 1256/57/58 and the KO servos.

Funny as I was going to get a KO one and plumped for the savox, seems that was my flaw!

Thanks

Graham