Rulux wheels

[lochness42]

Does fit Jconcepts Rulux wheels on XX4? Don't know if they share same hex.

[greasy mark]

losi wheels fit on a bj4/b33 so the jconcepts will fit on a losi

[Losi_110]

i'd borrow a wheel off someone with a b4 to check if i were you, my mate had both and i seen to remember that the hex's on the losi wheels are a lot shallower.

[Darren Boyle]

The J Concepts wheels WONT fit a Losi/X-Factory 4wd unless you change the hexs over to the Associated ones (which are thicker) - Losi _110 is correct the Losi wheels (and of course hex) are quite a bit shallower which makes the wheel bind when the nut is done up tight.

[3975dave]

By fitting the Associated hex and wheels does it change the front track width at all?

[Darren Boyle]

It does make it a couple of mm wider but still within the BRCA width limit

[Chris Doughty]

Originally Posted by 3975dave

By fitting the Associated hex and wheels does it change the front track width at all?

but fitting the AE hex AND AE or Rulux wheels at the same time does not change the track as far as I am aware.

only using the AE deeper hex with the 'shallow' wheels makes the track wider