|
|
#1
|
||||
|
||||
![]()
Hi Guys
ive got a Nosram Matrix 2007 Evo to put in my CAT SX, however i dont have a fan for it. How many run their speedos minus a fan ? Any problems as a result ? Cheers |
#2
|
||||
|
||||
![]()
Can't help with that specific speedo. The Tekin ones I run aren't designed for fan. My brother has a Losi system which he had removed the fan and it works fine too.
Due to the lower current of tenth off-road compared to say the 3 turn stuff you get in mod touring car most are happy enough. But again, I have no experience with the LRP systems so probably not the best informed response. |
#3
|
||||
|
||||
![]()
What motors are you using? I used to run my Matrix Comp in a 4wd with a 5.5 (6 cells) without a fan and it seemed just fine. It was warm/hot (not crazy hot) after 10 mins runs on grippy astro.
Now I use a fan on it cause it doesn't hurt ![]()
__________________
Schumacher KF | K1 Aero | RWS RZ6R |MiniZ MR-03 | Orion R10 esc | LRP motors | Orion 90c lipos Rusti Design - Awesome custom stickers and cool stuff My trader feedback Last edited by Gayo; 15-12-2008 at 02:34 PM. Reason: bad english |
#4
|
||||
|
||||
![]()
I've ran my matrix with everything from a 4.5 to 10.5 and it never really got too hot without the fan.
Peter |
#5
|
||||
|
||||
![]()
Cheers for the replies fellas much appreciated
![]() |
#6
|
|||
|
|||
![]()
Hi Rich,
I think the Matrix 2007 has a temperature monitoring system, which tells you the Speedo temperature after you have run it. Have a look in the manual. As for running a fan on the CATSX I would say that you should run a fan. You have to run an under tray and because of this you don't get the best of air flows around the motor and Speedo. Just think of it like this, When Speedos get hot they become inefficient and this generates even more heat. Catch 22. So why take the risk! If you’re not going to run a fan then I suggest you cut the air vents out on the top of the body shell. Tony |
![]() |
Thread Tools | |
Display Modes | |
|
|