Servo for YZ-2

[evertonal]

I'm not the greatest driver, tbh, but I have damaged 2 Savox 1251 low profile servos since going outdoors. What low profile servos are people using in their YZ-2's, or what servos would people recommend?

Ta

[tomtom]

I was advised to use a full profile servo on the YZ2.

Savox Low profile are not very strong either. I use to brake some KO low profile so went for regular size and didn't have any issue since.

No plastic parts, no flex, the servo will take every hit on the YZ.

[neallewis]

Savox 1251/1252 have really weak gears, avoid them in any car with out a servo saver. They were designed for touring cars, but they break them in those too.

I'd suggest you want a servo with at least a 12kg/cm torque rating. XpertRC low profile I use, Sanwa and KO are always good too. It's possible to fit a full profile servo, just tight. see pics of Lee Martins car with full sized XpertRC.

[RogerM]

I've run Futaba servos for best part of 3 decades and yet to have a failure of a Futaba low-profile servo.

[evertonal]

Thanks for the info guys, much appreciated.

[discothesnake]

I've used Futaba low profile servos for tread with no issues whatsoever. I'm now using Team Orion low profiles now they're fine too.