G-Force TS160 and Progbox

[Xracer]

Hi Guys,

just tried to program my new TS160 with the G-Force Progbox but it fails to connect, I have tried every option of bits connected and disconnected, radio on and off and a different connection lead but no joy.

Any ideas?

[Ross]

Originally Posted by Xracer

Hi Guys,

just tried to program my new TS160 with the G-Force Progbox but it fails to connect, I have tried every option of bits connected and disconnected, radio on and off and a different connection lead but no joy.

Any ideas?

I think that maybe the same speedo As a guy at our club has. He had the same issue, if I'm correct then the program box may need updating with the latest software.

[tcboy1983]

Is the programmer upto date 2.02 or higher as I know some programmer don't come up to date try this

The older softwear isn't compatible with the 160 as it runs 2.01 softwear

Hope it helps

[Xracer]

Hi tcboy,

thank you for that reply and I did suspect that may be a possible cause, trouble is I don't have a suitable USB cable at the moment to interface with the Progbox so I must pursue that avenue now.

Thanks again and regards, John

[Xracer]

Well guys,

I found a suitable USB lead and connected everything up as the instructions state, software already downloaded onto PC, Progbox saying connected to PC, so switch on the esc and same problem, the Progbox says connection failed and this stops the software from running with the screen graphic saying esc is disconnected, you cannot get into the software update section at all for the Progbox to download this first.

If you try to download the software just connected to the Progbox it wants to connect to the esc.

I am totally lost on this one!

[xtreme-rc]

Hi,
Contact ed Kerry on here, he is able to help
Xtreme

[tcboy1983]

Is it pc software 2.07 as that the newest one to use other wise yea u may need a tech to help u