|
|
#1
|
|||
|
|||
![]()
hi all,,,i have just got a dx4c and the receivers are £40 each,,is there any cheaper ones which will work or am i best off sticking with the sr410 which are recommended..thanks in advance ray
|
#2
|
||||
|
||||
![]()
If you only need 2 channels I use these
http://www.rccarshop.co.uk/index.php...of-coated.html Orange RX from hobbyking are cheaper still but there have been issues with them I believe |
#3
|
|||
|
|||
![]()
thanks for reply mate,,do you know if you can use a transponder in the bind socket ?
|
#4
|
||||
|
||||
![]()
The orange RX's no longer work with my dx4s so I'd say that the case for all the dx4 series. I use the 4 channel sport RX's from model sport. They are £29 and are really small so it helps with wiring.
|
#5
|
||||
|
||||
![]()
Hi
I use the orange rc receiver's without any issues. But they only work if the handset firmware hasn't been updated. So worth a check. HTH's
__________________
|
#6
|
||||
|
||||
![]()
Yes bind port can be used for transponder
|
![]() |
Thread Tools | |
Display Modes | |
|
|