xx4 front wheels

[warped]

Can anybody tell me if it's possible to fit xx4 front wheels to the front of a xxx (2wd)?

Cheers

David

[Darren Boyle]

Not really, the hex size is the same but the hole in the middle of the wheel is a lot bigger on the 4wd and the offset is way out too.

[ashleyb4]

and the hex's are to deep so proberly would bind on the hub.

A

[Ferret]

The offset problem can be fixed by running the wide front end configuration; moving the spacers from the inside of the wheel bearings to the ouside.

The different center hole size might be worked around by using an appropriate washer under the wheel nut.

I'm having a special wheel nut machined that I hope will hold the wheel while filling the larger hole in it.

I don't think that the hex thickness is a problem.

[ashleyb4]

But why would you want to?

A

[warped]

Thanks for the replies.

Ferret - Does the car come in below the max width (250mm) when xx4 wheels are installed as you describe?

Have found a possible alternative in the form of zx5 front rims which I should be able to fit with a few axle mods.

[warped]

At Ash

Because 4wd front tyres work better on 4wd front rims.

[bigred5765]

but there the same width