|
|
#1
|
|||
|
|||
![]()
I have just brought spektrum dx2e and a secondhand sr3500 but can't get to bind together I have a green light on my tranmitter and the receiver is flashing orange all the time does anyone if they work together or do I need to get another receiver !! If I need another receiver want do I buy as need a mirco receiver as I have durango 410 not much room any help would be great!!
|
#2
|
||||
|
||||
![]()
I assume you have used the bind plug in the correct bind port. You must place the receiver in bind mode first with rapid flashing lights then bind the transmitter
__________________
Luniemiester drives: AE B6.1 AE B6.1d AE B74 AE T6.1 AE SC6.1 Kits and parts supplied by: http://www.rccarshop.co.uk/[/size] My Feedback thread: http://www.oople.com/forums/showthre...945#post691945 |
#3
|
||||
|
||||
![]()
previous post is correct you must first get rx in to bind mode (rx light flashing quickly ) then get tx into bind mode rx light then should go solid
dave |
#4
|
|||
|
|||
![]()
Hi I have put the transmitter in bind mode and put the bind plug in the receiver all the receiver does flashing orange I had binding for 5mins it not doing no think do you the receiver ??
|
#5
|
||||
|
||||
![]()
Have you followed the instructions to the letter on page 2 of the manual?
http://www.horizonhobby.com/pdf/SPM2322-Manual_EN.pdf
__________________
Luniemiester drives: AE B6.1 AE B6.1d AE B74 AE T6.1 AE SC6.1 Kits and parts supplied by: http://www.rccarshop.co.uk/[/size] My Feedback thread: http://www.oople.com/forums/showthre...945#post691945 |
#6
|
|||
|
|||
![]()
Yeah a followed all that just make sure I was doing it right the orange light still flashing ??
|
![]() |
Thread Tools | |
Display Modes | |
|
|