Go Back   oOple.com Forums > General > General Race Chat

Reply
 
Thread Tools Display Modes
  #1  
Old 28-01-2015
markymark6183 markymark6183 is offline
Member
 
Join Date: Jan 2011
Location: Four crosses, Powys
Posts: 264
Default belt or shaft driven

Hi, looking at getting a new 4wd and basically wondering what your opinions are on belt drive or shaft !!

Cheers
Reply With Quote
  #2  
Old 29-01-2015
wookiee76 wookiee76 is offline
New Member
 
Join Date: Jan 2015
Posts: 18
Default

Shaft driven is generally more efficient than belt whereas belt drive doesnt give any left to right torque imbalance. Ive always preferred belts and when I looked most if not all the shafties had geared diffs which you cant really adjust quickly, ball diffs however take seconds to tighten or loosen. I would see what does well at your local track if unsure and also which spares are easily available. I went for a tlr 22-4 but ive always been a losi fan going back to the jr2 and absolutely loved my xx4, xxx4 was a different matter.
Reply With Quote
  #3  
Old 29-01-2015
badger5 badger5 is offline
Senior Member
 
Join Date: Jul 2011
Location: Hampshire
Posts: 495
Default

I don't think belt drive is less efficient than shafts, it may feel this way when turning the transmission by hand but due to the bevel gears required in shaft drives the loading and friction increases when load is applied, whereas belts seem to stay the same. This is why my K1 can accelerate so well.
With belt drive cars the motors direction of rotation can be used to influence the cars handling, with my K1 the motors torque reaction is towards the front of the car giving the car more on power steering and lively whereas with the new Serpent the motors torque reaction will be towards the rear of the car helping tractio . With shaft drive cars they want the torque reaction of the motor to be eliminated as it will be from side to side upsetting the cars handling.
If you have any concerns about belts being exposed and failing, I've driven a K1 for about two years without one failure from a belt.
At the end of the day see what's used at your local track and see if you can try a couple of different cars if people will let you, different cars have there own traits and handling characteristics and what suits one person may be wrong for someone else.
Reply With Quote
  #4  
Old 30-01-2015
mark christopher's Avatar
mark christopher mark christopher is offline
Spends too long on oOple ...
 
Join Date: Jan 2007
Location: haxey, doncaster
Posts: 7,787
Send a message via MSN to mark christopher
Default

Belt is more efficient than shaft, but who then were not runing out of power, I prefere belt after running both
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD
Reply With Quote
  #5  
Old 30-01-2015
Welshy40's Avatar
Welshy40 Welshy40 is offline
Spends too long on oOple ...
 
Join Date: Sep 2006
Location: .
Posts: 4,773
Default

Belt is better but all depends if a one way is an option, shafts dont. Losi is a doddle to clean and serpents new belt drive would be my next move, also all enclosed and does seem plausible a one way will be an option and seems a better drive train than losi, based on what MIP did in the late 80's, Tamiya and Kyosho developed in 90's and early 2000. 2wd rear gearbox and belt to the front. Im tempted but cant stop using my Lazer ZXR belt drive
__________________
www.kamtec.co.uk
www.fibre-lyte.co.uk
answer-rc.com/uk/en/
Answer UK team driver
Designer of the Lazer ZX/ZXR carbon fibre tub chassis
Designer of the Lazer ZXRS
Reply With Quote
  #6  
Old 30-01-2015
markymark6183 markymark6183 is offline
Member
 
Join Date: Jan 2011
Location: Four crosses, Powys
Posts: 264
Default

Thanks for the response guys, been with my b44.1 for a while now and fancy either the losi 22-4 or the schumacher k1 aero but just not sure if they are more maintenence been belt driven and also do belts strip easily ??

Thanks
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:04 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
oOple.com