Fast well priced servos for 10th

[av4625]

What servos out there are pretty fast and wont break the bank?

[Dandare]

I've had one of these in my TC02C Evo for a while, similar in spec/performance as my Savox 1258 but almost a 3rd of the price.

http://www.hobbyking.com/hobbyking/s...arehouse_.html

And recently I've put the 11kg version in another buggy,

http://www.hobbyking.com/hobbyking/s...arehouse_.html

[whittaker52]

I run one of the TS-915 servos in my Traxxas XO-1. It's a great servo, great build quality, strong and solid - http://www.hobbyking.com/hobbyking/s..._UK_Wareh.html

and I run one of the TS-400MG servos in my Schumacher Supastox. again, great quality, pretty strong and fairly solid, and an incredible price - http://www.hobbyking.com/hobbyking/s...11sec_UK_.html

[SlowOne]

None. Yes, I am sure all these work OK, but the best servos cost money. Futaba, KO and JR servos are fast, accurate, reliable and will last many, many years. As many of us have learnt the hard way, you get what you pay for. HTH

[Dandare]

Originally Posted by SlowOne

None. Yes, I am sure all these work OK, but the best servos cost money. Futaba, KO and JR servos are fast, accurate, reliable and will last many, many years. As many of us have learnt the hard way, you get what you pay for. HTH

To be fair, he did ask which servos are fast & don't break the bank. The suggested servos do both.

[OneKiwi]

Hobbyking now have the goteck servos that I think are feetech rebadge.

I've been using the feetech 15kg 07sec in both 8th and 10th for nearly 6 months. I'm even testing their LP in a 4wd with no servo saver with good results.

I'm happy with them but would like a different case tho a sticker helps.

[spiboom85]

Im Running the this very happy with it

http://insidelineracing.co.uk/inside...uipment/servos

£41.75

Measurement L/W/H (mm): 40,8x20,2x26,8
Weight: 47g
Regulating time 60° (sec): 0,105 sec at 4,8V and 0,093 sec at 6V
Pulling force (kg): 10 kg at 4,8V and 12 kg at 6V
Operating voltage: 4,8 - 6V
Ball bearings: 2
Motor type: coreless
Servo gears: High quality steel
Servo housing: Partly aluminium
Servo cable length: 30cm
Servo cabel plug: JR/Futaba
Tooth: 25 tooth

Combat - Security: All servo gear units are made of extremely durable quality steel and are therefore much more resistant than titanium alloys.

[SlowOne]

Originally Posted by Dandare

To be fair, he did ask which servos are fast & don't break the bank. The suggested servos do both.

Agreed; I was pointing out that fast and cheap means they don't usually last, and many don't perform the real function of a steering servo - accurate.

With apologies to Keith Bontrager, servos can be selected by picking from fast, accurate, cheap. You can only pick two...

[DynaMight]

I've been running this servo in my 2WD offroad since last April: http://www.hobbyking.com/hobbyking/s...g_0_06Sec.html

It was the fastest cheap one I could find. 0.06sec. Doesnt have the greatest torque but I find it fine in my 2WD. Like I said, I've been running it since April, 2 meetings a month minimum, probably about 3-4 in the summer months. No issues.

If/when it breaks, I'll probably buy another one.