|
|
#1
|
||||
|
||||
![]()
as title really - if anyone has a good starting point setup for the indoor track at Southport, please let me know what you have.
Thanks |
#2
|
||||
|
||||
![]()
I very rarely change my setup anywhere, only subtle differences. The slight exception being Worksop where more steering than normal is required.
I'd go with Ellis starting setup and take it from there.
__________________
Nortech is ACE! |
#3
|
||||
|
||||
![]()
OK, will do.
thanks |
#4
|
||||
|
||||
![]()
The only thing I ever do is vary the oils a fraction thinking about it. I usually run 27.5wt in the rear (which for some reason feels the same on the bench as Ellis rear shocks with 25wt in, when I run 25wt it feels much softer than his). So occasionally I up and down the weights by 2 1/2 wt but rarely any more than that.
Having just started running Lipo, the balance is similair with some weight added to the front however we're still learning the exact differences beween running Lipo and Nimh in various track condtions.
__________________
Nortech is ACE! |
#5
|
||||
|
||||
![]() Quote:
![]()
__________________
Stevie Brew [email protected] http://www.oople.com/forums/showthre...hlight=stegger |
#6
|
|||
|
|||
![]()
I'm sure Dan's answer will be Losi.
![]() Having said that, has anyone seen NEW Losi oil??? I'm sure I saw a bottle of 30wt (normally clear) that was coloured light red. ![]() |
#7
|
||||
|
||||
![]()
No they have their own bottles now
![]() I have gone down to 25 wt (losi) in the rear since running lipo. I still run 35 up front but with a cut green spring |
![]() |
Thread Tools | |
Display Modes | |
|
|