TC02C EVO build

[JoelMaher]

Just starting my EVO build, looks a great piece of kit. Does anybody have any hints or tips on the build to share?
thanks

[brooksy]

Be careful when you screw the gearbox together,I found that the gears did bind a little so you may have to back the screws off slightly. I know some people that didn't have this problem but I did.

If you have a Dremel,you'll need to put a groove in the chassis where the bottom motor screw goes in. You will struggle to get it in straight if you don't and may cross thread the hole.

Other than those couple of things I would say it's a straight forward build. Only run mine once up to now but was very impressed with it

This a set up sheet from Craig Collinson for his tc02c Evo from Chadderton.

[brooksy]

......oh,and I've started with 5000wt diff oil

[adey]

I have ran mine for a few months now and I would say to use a small amount of thread lock on the gearbox screws that go into the motor plate as they can come loose.

[JoelMaher]

Okay thanks for that lads, I've read about some people having issues with the gearbox? A bearing proud somewhere. Haven't got to that yet has anyone come across it?

[cocker7433]

Joel you need to put a ball diff in give us a ring